Repair guides › Accessories

Install pegs

Tubes that slide onto the axles for grinds and stall tricks. Held on by the axle nuts or bolts. Plastic sleeves slide better on ledges and are replaceable.

Open this job in RideLoadout▶ Watch it done

Tools

• BMX axle wrench 15/17/19 mm: BMX axle wrench 15 17 19 mm ($)

Compare Good, Better and Best for each tool

Steps

1. Remove the axle nut on that side.
2. Slide the peg on (use the reducer sleeve for 3/8" axles).
3. Refit and tighten the axle nut or peg bolt.
4. Check the chain still clears on the drive side.

Torque

Signs it needs doing

• Peg spins or loosens (axle nut loose)
• Sleeve worn through